TP-Link Auranet EAP110 - Page 61

 Enable Auto Mail
If Auto Mail Feature is enabled, system logs will be sent to a mailbox. The following
content will be shown.
Figure 7-4 Enable Auto Mail
From: Enter the sender’s email address.
To: Enter the recipient’s email address, which will receive the system logs.
SMTP Server: Enter the IP address of the SMTP server.
Enable
Authentication:
Generally users are required to log in to the SMTP server by entering
user name and password.
 User Name: Enter the sender’s email address.
 Password: Enter the password of the sender’s email address.
 Confirm Password: Enter the password again for confirmation.
Time Mode: System logs can be sent at specific time or time interval.
 Fixed Time
: Set a fixed time, for example, 15:00. The recipient will
receive the system logs sent by the device at 15:00 every day.
 Period Time: Set a time interval, for example, 5 hours. The recipient
will receive the system logs sent by the device every 5 hours.
 Enable Server
System logs can also be sent to a server. After Enable Server is enabled, the following
content will be shown.
50