TP-Link Deco M3W - How to Set up a Onemesh Network

15
Chapter 3
OneMesh with Seamless Roaming
3. 2. How to Set Up a OneMesh Network
Once the extender is connected to a TP-Link OneMesh router via any method, the
extender will automatically join the router’s OneMesh network and copy the router’s
wireless settings. You can manage all mesh devices in the OneMesh network all on your
router’s web page.
If you want to remove the extender from the OneMesh network, follow the steps below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > OneMesh and turn off the Join OneMesh switch.