TP-Link Deco X10 User Manual

5
9. Create your Wi-Fi network
Set a network name and a password. These will
be the name and password you use to connect
your devices to Wi-Fi.
8. Connect your Deco to the internet
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
7. Specify your Deco's location
Select or custom a location for your Deco.
The location will be used as the name of your
Deco.

TP-Link Deco X10 Specifications

General

Antenna type	Internal
Product type	Mesh router
Reset button	Yes
Product color	White
Maximum coverage	190 m²
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Apps supported	TP-Link Deco
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
Security algorithms	WPA, WPA2, WPA3
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
WLAN data transfer rate (max)	1500 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
WLAN data transfer rate (second band)	1201 Mbit/s
Operating modes	Router Mode, Access Point Mode
Number of guest networks (5 GHz)	1
Ethernet LAN (RJ-45) ports	2

Weight and Dimensions

Width	110 mm
Height	114 mm