TP-Link Deco X20-DSL - Deco Unit Maintenance Operations; Remove Deco Unit from Network; Reboot a Deco Unit; Reset Deco to Factory Defaults

17
Remove/Reboot Deco
You can remove or reboot your Deco easily in the Deco app. Follow the steps below.
Note: Removing a Deco will reset it to factory default settings. You can also press the Reset button at the bottom of Deco for 1 second and release to quickly reset your Deco to factory default settings.
1. In Overview, tap . 3. Tap to remove or reboot the Deco.
Note: If the LED light of Deco does not turn pulsing blue after tapping Remove, press the Reset
button on the Deco for 1 second and release to reset it.
2. Select a Deco unit.