2
Appearance
Each Deco has an LED that changes color according to its status, a DSL LED that indicates the DSL synchronization process and the connection
status, four RJ-45 Ethernet ports, one DSL port, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup
or WPS in progress.
Blue solid:
Deco is setting up.
Green pulse:
Deco is upgrading rmware.
Green solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Reset Button:
Press for 1 second and release to reset Deco to factory default settings.
The light changing from pulsing yellow to solid yellow indicates a successful reset.
Gigabit Ethernet Ports:
For connecting Deco to your modem, the Ethernet outlet or other internet
services.
DSL Port:
For connecting Deco to the internet. Connect the port to the splitter or
directly to the phone jack via a phone cable.
DSL LED:
• On: The DSL port is connected and the DSL synchronization is complete.
• Pulsing: The DSL synchronization is in progress.
• O: The DSL port is disconnected or the DSL synchronization fails.
Power Slot:
For connecting Deco to the power socket via the provided power adapter.
To Next Page
Loading...
Need help?
General
