TP-Link Deco X73-DSL - SIP ALG, UPnP, and Wireless Enhancements

43
View IPv4 details or change the
internet connection type.
Note: This feature is not available when your
Deco works in Access Point. When Deco works in
DSL Modem Router mode, you can only change
the internet connection type in Quick Setup.
Enable IPv6 to set up an IPv6
internet connection.
Note: This feature is not available when your
Deco works in Access Point mode.
Add IPv6 firewall rules to allow
specific devices to access the
specified services.
Note: This feature is not available when your
Deco works in Access Point mode.
Modify LAN IP to avoid IP address
conflict.
Note: This feature is not available when your
Deco works in Access Point mode.