TP-Link Deco X73-DSL - LED Control, Operation Mode, and Backup; USB Sharing and Connection Alerts

44
Change DHCP Server settings.
Note: This feature is not available only when
your Deco works in Access Point mode.
Follow Telephony to make calls via
the internet.
Note: This feature is not available when your
Deco works in Access Point mode.
Enable IPTV/VLAN mode to
support IPTV services.
Note: This feature is not available when your
Deco works in Access Point mode.
Configure DSL settings. Enable Bit
Swap to allow your Deco to adapt to
the changing telephone line conditions.
Enable SRA to prevent ADSL data rate
interference caused by the cross-talk
between telephone lines.
Note: This feature is available only when your Deco
works in DSL Modem Router mode.