45
Reserve IP addresses for specic
devices to recognize and manage
the device more easily.
Note: This feature is not available when your
Deco works in Access Point mode.
Set up port forwarding rules to
enable devices in your network
accessible over the internet with
safety.
Note: This feature is not available when your
Deco works in Access Point mode.
Register a TP-Link DDNS domain
name to access your router and
local servers using a domain name.
Note: This feature is not available when your
Deco works in Access Point mode.
Enable MAC Clone if Deco fails to
connect to the internet.
Tip: For more about MAC Clone, refer to
https://www.tp-link.com/support/faq/2925/
Note: This feature is not available when your
Deco works in Access Point mode.
To Next Page
Loading...
