TP-Link HA100 - Chapter 2. Quick Setup; Connect; Pair

Chapter 2. Quick Setup
1. Connect
Connect your music receiver as shown in the figure below.
2. Pair
On your smart device, turn on Bluetooth and pair
TP-LINK_Music
.
Now you can play and enjoy music!
Usage Tips:
1. Tapping the paired music receiver will disconnect or reconnect it.
2. To pair a new smart device, disconnect the current one first.
3. You can connect the music receiver to two previously paired devices, but it can only play music from one device at a time.
4. The music receiver will be disconnected if your device's Bluetooth signal has been blocked or out of range (66 feet/20 meters) for
more than 5 minutes.
Chapter 2 Quick Setup 3