15
Chapter 4
Set Up Internet Connection
2. Go to Advanced > Operation Mode, select Access Point and click Save. The AP will
reboot and switch to Access Point mode.
3. After rebooting, connect the AP to your existing wired router via an Ethernet cable.
4. Log in again to the web management page
http://tplinkwifi.net, and click Quick Setup.
5. Configure your wireless settings and click
Next.
6. Confirm the information and click Save. Now, you can enjoy Wi-Fi.
Tips:
• Functions, such as Parental Controls, VPN Server and NAT Forwarding, are not supported in the Access Point mode.
To Next Page
Loading...
