Need help?Do you have a question about the TP-Link HX220 and is the answer not in the manual?
General| Wi-Fi Generation | Wi-Fi 6 |
|---|---|
| Security | WPA3 |
| Frequency | Dual-band |
| LAN Ports | 3 |
| Mesh Networking | Yes |
| Wireless Standard | 802.11ax |
| Frequency Band | 2.4 GHz, 5 GHz |
Step-by-step guide to log in to the AP's web interface.
Automated process for setting up the internet connection.
Manual configuration for different connection types like PPPoE, Static IP.
Instructions to configure the AP to extend existing wired networks.
Detailed steps for utilizing the Quick Setup wizard.
Configuration details for Dynamic and Static IP internet connections.
Configuration details for PPPoE and L2TP internet connections.
Configuration details for PPTP internet connection.
Steps to set up the AP in Access Point mode.
Covers wireless and wired methods to add mesh agents.
Steps to add mesh devices using the web interface.
Guides on enabling and configuring parental controls for website access.
Detailed steps for setting up content filtering using blacklists or whitelists.
Configuration of SPI Firewall and Denial of Service protection.
Restricting access to specific services or the internet.
Managing device access using MAC filtering (Blacklist/Whitelist).
Binding IP addresses to MAC addresses to prevent ARP spoofing.
Detailed steps for configuring firewall and DoS protection settings.
Instructions for setting up service filtering rules.
Steps to enable and configure access control for devices.
Detailed steps for configuring IP & MAC binding.
Instructions for setting up an OpenVPN server.
Instructions for setting up a PPTP VPN server.
Instructions for setting up an IPSec VPN server.
Detailed steps to enable and configure the OpenVPN server.
Steps to install and configure OpenVPN client software.
Instructions to enable and configure the PPTP VPN server.
Step-by-step guide for setting up a PPTP VPN connection in Windows.
Introduction to IPSec VPN, including topology and IP recording.
Steps to configure IPSec VPN settings for the local network.
Steps to configure IPSec VPN settings for the remote network.
How to check if the IPSec VPN connection is established correctly.
Modifying LAN IP address and DHCP server settings.
Changing SSID, password, security, and advanced wireless parameters.
Steps to modify the device's LAN IP address.
Configuring the AP to assign IP addresses to clients.
Details on IP address pool, lease time, and other DHCP settings.
Assigning static IP addresses to devices via Address Reservation.
How to change the wireless network name and password.
Options for hiding SSID and managing band steering.
Instructions for manually updating the device's firmware.
Instructions for downloading and installing firmware updates.
To Next Page