53
Chapter 11
VPN Server
1 ) Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 ) Go to
Advanced > VPN > IPSec VPN, and click Add.
3 ) In the IPSec Connection Name column, specify a name.
4 ) In the
Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address.
5 ) Configure
Site A’s LAN.
In the
Tunnel access from local IP addresses column, we take Subnet Address
as an example. Input the LAN IP range of Site A in the
IP Address for VPN column,
and input
Subnet Mask of Site A.
6 ) Configure
Site B’s LAN.
In the
Tunnel access from remote IP addresses column, we take Subnet
Address
as an example. Input the LAN IP range of Site B in the IP Address for
VPN
column, and input Subnet Mask of Site B.
To Next Page
Loading...
