6
Install Your Smart Light Strip
After you have set up the Light Strip via the Kasa Smart app, you can cut it to length-t and attach it to any surface with the 3M adhesive.
To avoid damaging your Light Strip, please note the following Installation tips before installing the Light Strip.
≥90° LED
INSTALLATION
TIPS
Cut Only Along the Cutting Lines of Light Strip
You can custom tailor the length of your Light Strip with scissors.
Unplug the Light Strip and cut only along the cutting lines or your
Light Strip will no longer function.
Avoid Bending on LED Beads
The bend should be avoided just in the position of the LED
components, so as not to damage the product and aect the life of the
product.
Avoid Sharp Corners
Use gentle weeps when bending Light Strip around corners and avoid
creases as they may cause damage.
Avoid Sharp Turns
Carefully roll the Light Strip into a clover or use a gentle hill when
making 90° turns like those need behind a TV. Sharp bends can damage
your Light Strip.
To Next Page
Loading...
