Functions on the router’s user interface
42
PPTP server
When the router acts as a PPTP Server, it provides a secure virtual tunnel between your home
network and a remote computer.
Example
You have a FTP server (LAN IP: 192.168.0.154) in your home network. If you want to visit the
resources on the FTP server from the company’s computer, you can refer to the following
procedures.
Configuration
To set up a PPTP server:
1. Log in to the router’s user interface, and click VPN > PPTP Server.
2. Click PPTP Server button to enable the feature.
3. Type an IP range for PPTP clients which should not overlap with the IP address of the PPTP
server.
4. Enable MPPE Encryption, and select an encryption bits, 40 or 128 according to your needs.
5. Specify a username and password for your PPTP server, and click Add.
6. Click Save.
To Next Page
Loading...
