TP-Link M5350 - Chapter 2. Hardware Installation; 2.1 Environment Requirements; 2.2 Install SIM and Memory Card

M5350
3G Mobile Wi-Fi User Guide
-4-
Chapter 2. Hardware Installation
2.1 Environment Requirements
 Place the Device in a well-ventilated place far from any heater or heating vent
 Avoid direct irradiation of any strong light (such as sunlight)
 Keep at least 2 inches (5 cm) of clear space around the Device
 Operating Temperature: 0℃~40℃ (32℉~104℉)
 Operating Humidity: 10%~90%RH, Non-condensing
2.2 Hardware Installation
STEP 1: Install SIM card and memory card.
1) Open the cover upwards (as the arrow shows).
2) Make sure to have the SIM card’s metal chip downwards and the triangle notch outwards,
and then slide the card into its slot (in the direction as the arrow shows).

Note:
If you have a Micro-SIM or Nano-SIM, please use an adapter to convert it to a standard SIM
card.