-8-
Note:
The default SSID (also called Wireless Network Name) of the device is TP-LINK_ XXXX.
(XXXX is the last 4 characters of the device’s MAC address.) You can check the SSID and
Password on the rear cover label.
3. Enter the wireless password and then click OK.
4. When Connected appears behind the SSID of M7300, you’ve successfully connected to
its wireless network.
Note:
After successful connection to M7300 (with a SIM card inserted), you can enjoy the 4G mobile
connection instantaneously. If not, please refer to FAQ and retry.
To Next Page
Loading...
