3
Appearance
Motion Sensor has an internal LED that changes color according to its status, a sensor, a battery compartment and a wall mount. See the explanation
below:
Orange
Power up or fail to join the network.
Blue
Sensor event or succeed to join the network.
Flashing orange
Factory resetting the sensor.
Flashing orange and blue
Searching for the network or joining the network.
Press for 1 second to restart the
pairng mode.
Press and hold for 5 seconds to reset
the sensor to factory default settings.
Wall Mount
Restart/Reset Button:
Sensor
Battery Compartment
To Next Page
Loading...
