Omada VPN Gateway
14Hardware Connection
Chapter 3 Hardware Connection
Follow the steps below to connect your gateway to the internet.
Connect to SFP/SFP+ WAN Slot
2
Connect via Ethernet
Modem
Connect to a RJ45 WAN Port
1
Connect via ber
Internet
Internet
Fiber-Optic Cable SFP/SFP+ Module
Note:
■
1. If you want to connect to the internet via another RJ45 WAN port, refer to FAQ-Q1 to
configure your desired port to a WAN port first, and connect the port to the internet via an
RJ45 cable.
■
2. If you want to connect to the internet via another SFP/SFP+ WAN port, refer to FAQ-Q1
to configure the SFP/SFP+ port as a WAN port first, and connect the SFP/SFP+ port to the
internet via an SFP/SFP+ module.
To Next Page
Loading...
