TP-Link Omada ER7406 - Page 22

Omada VPN Gateway
19 Software Conguration
3. Get started with the Omada Setup Wizard to set up the network.
4. After the network setup is complete, click Finish to configure more settings and manage your
network.
For detailed configurations, refer to the User Guide of the gateway. The guide can be found on the
download center of our official website: https://www.tp-link.com/support/download/.
More management methods
* Via Omada App
With the Omada app, you can also manage your gateway at a local site or a remote site via your
mobile device.
Scan for Omada App Omada App
or
* Via Omada Cloud Portal
You can also remotely access the gateway through Omada Cloud Portal. Follow the steps below.
a. Enable Cloud Access on the setting page on the controller and bind a TP-Link ID to your controller.
If you have configured this in the setup wizard, skip the step.
b. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar.
c. Enter your TP-Link ID and password to log in. A list of controllers that have been bound with your
TP-Link ID will appear. Then you can click Launch to further configure the controller.
For the detailed configurations, refer to the User Guide of the controller. The guide can be found on
the download center of our official website: https://www.tp-link.com/support/download/.