OnHub
Table of Contents
Welcome
What’s In the Box
What You Need
Plug in OnHub
Get the App
Set-Up WiFi
Welcome to OnHub
We use the Internet for so much more than we used to. We stream movies, watch TV, download music.
OnHub keeps up with all the ways you're enjoying the Internet, easily and securely. Let's plug it in and
get started.
What’s in the Box
● OnHub wireless router with housing
● 2x ethernet cables
● 1 power adapter
What You Need
The Google On App on Android or iOS mobile device:
Android 4.0 and above
iOS 7 and above
A broadband Internet account via Ethernet connection—typically through a DSL or cable modem.
Contact your local Internet Service Provider (ISP) for details.
Plugging in the OnHub
Twist left and lift the plastic housing to find the power and ethernet ports at the base of the port.
Connect one end of the provided ethernet cable to the OnHub ethernet WAN port (SYMBOL) and the
other end to one of the ethernet ports of your DSL or model cable.
Connect the cable from your power adapter to your OnHub and plug your OnHub into a power outlet.
Important: Use only the AC adapter that came with your OnHub.
The status light will pulse blue when OnHub is ready for setup.
Open the Google On app on your mobile device to set up your OnHub and wireless network.
What color is the OnHub?
● White
○ Solid: OnHub is ready to go.
● Blue
○ OnHub is ready for setup or, if flashing, setting up.
1
To Next Page
Loading...
Need help?
General
