Need help?Do you have a question about the TP-Link TD-8817 and is the answer not in the manual?
General| Type | ADSL2+ Modem Router |
|---|---|
| WAN Port | 1 x RJ-11 |
| Wireless | No |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Device Type | Router |
| Power Supply | 9V DC, 0.6A |
| Standards | ITU G.992.1(G.dmt), ITU G.992.2(G.lite) |
| Protocols | RFC 2364 |
| Firewall | NAT, SPI |
| ADSL Standards | ANSI T1.413, ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.992.3/4 (ADSL2), ITU G.992.5 (ADSL2+) |
| Data Rate | Up to 24 Mbps downstream |
| Security | WPA/WPA2 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
Summarizes the device's purpose and core functions.
Details the key capabilities and technical specifications of the router.
Explains the status lights on the front of the modem.
Describes the physical connections and controls on the rear.
Step-by-step guide for physically connecting the device.
Sets up the PC's network settings for router communication.
Instructions for installing and using the USB interface.
Guides users to access the router's web-based management utility.
View device status, logs, and network statistics.
Configure WAN, LAN, and IPv6 transition (6RD) interfaces.
Details advanced settings like Firewall, Routing, NAT, QoS, VLAN, ADSL.
Manage network access, filters, SNMP, UPnP, DDNS, CWMP.
Perform system maintenance, manage settings, upgrade firmware, and run diagnostics.
Instructions to reset the modem router to its original factory settings.
Solutions for problems accessing the web-based configuration interface.
To Next Page
