Need help?Do you have a question about the TP-Link TD-W8151N and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Frequency range | 2.400 - 2.4835 GHz |
| Dimensions (WxDxH) | 165 x 108 x 28 mm |
| WLAN data transfer rates supported | 150 Mbit/s |
| Quality of Service (QoS) support | No |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 128-bit WEP, 64-bit WEP, TKIP, WPA-PSK, WPA2-PSK |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Wi-Fi standards | 802.11b, 802.11g |
| Top Wi-Fi standard | 802.11g |
| Certification | CE, FCC, RoHS |
Weight and Dimensions| Weight | - g |
|---|
Details the purpose and basic connectivity of the TD-W8151N ADSL2+ Modem Router.
Highlights the key hardware and software capabilities of the TD-W8151N router.
Explains symbols and notations used throughout the user guide for clarity.
Details the LEDs on the front panel and their corresponding status indications.
Identifies and explains the function of buttons and ports on the back panel.
Provides guidelines for optimal placement and environmental conditions for the router.
Step-by-step instructions for connecting the modem router to the telephone line and network.
Steps to configure your PC's network settings to access the router's interface.
Instructions on how to log in to the router's web-based management interface.
View device information, system logs, and network traffic statistics.
Configure Internet (WAN), LAN, and Wireless network interfaces.
Guides through setting up Wi-Fi Protected Setup (WPS) for easy device connection.
Configure Firewall, Routing, NAT, QoS, VLAN, and ADSL settings for network control.
Configure Network Address Translation for sharing a single IP address.
Manage access controls, filters, SNMP, UPnP, DDNS, and CWMP for network security.
Implement IP, MAC, Application, and URL filters to control network access.
Steps to reset the router to its original factory default configuration.
Guidance on recovering lost passwords and accessing the router's interface.
Steps to resolve issues preventing access to the router's web-based configuration page.
Steps to diagnose and resolve problems with accessing the internet.
To Next Page
