Need help?Do you have a question about the TP-Link TD-8840 and is the answer not in the manual?
General| ADSL2/2+ Downstream Data Rate | Up to 24 Mbps |
|---|---|
| ADSL2/2+ Upstream Data Rate | Up to 1 Mbps |
| Device Type | ADSL Router |
| WAN Port | 1 x RJ11 |
| LAN Ports | 4 x RJ-45 |
| Wireless Standard | 802.11g |
| ADSL Standards | ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite) |
| Firewall | SPI Firewall |
| Interface | Web-based |
| Ports | 4 x LAN |
| Standards | IEEE 802.3, IEEE 802.3u |
| Protocols | TCP/IP, PPPoE, PPPoA |
| DHCP | DHCP Server, DHCP Client |
| LAN Interface | 10/100 Mbps |
| Wireless Security | WEP, WPA, WPA2 |
Overview of the ADSL2+ Modem Router's capabilities, features, and supported protocols.
Details necessary computer system specifications and recommended operating conditions.
Identifies system needs and describes front/rear panel components of the router.
Step-by-step guide for connecting the TD-8840 modem router.
Configures computer IP settings to enable access to the router's web interface.
Guides users through logging into the router and performing initial configuration.
View current device status and access the quick setup guide for initial configuration.
Configure WAN, LAN, and DSL interfaces for internet connectivity and network settings.
Configure security features like MAC filtering and manage network routing paths.
Test connection status and manage router settings, firmware, and logs.
Instructions for setting up dial-up connections in Windows XP and Vista.
Provides the default username, password, and IP address for router access.
To Next Page
