Need help?Do you have a question about the TP-Link TD-8811 and is the answer not in the manual?
General| Connectivity LEDs | Yes |
|---|---|
| Dimensions (WxDxH) | 165 x 108 x 28 mm |
| Connectivity technology | Wired |
| Maximum data transfer rate | 0.1 Gbit/s |
| Supported data transfer rates | 10/100 Mbps |
| Networking standards | IEEE 802.1d |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Routing protocols | IP |
| Supported network protocols | PPPoE, RFC 2364 |
| DSL specification | ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.992.3, ITU-T G.992.5 |
| Ethernet LAN (RJ-45) ports | 1 |
| Firewall security | Network address translation (NAT) firewall, Stateful packet inspection (SPI) firewall |
| Security algorithms | 802.1x RADIUS |
| Filtering description | Domain |
| Product color | Black, White |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power consumption (typical) | 4.1 W |
Weight and Dimensions| Weight | 300 g |
|---|
Provides step-by-step instructions for physically installing the ADSL Router.
Guides users on configuring their PC's IP address settings for automatic or manual assignment.
Explains how to access the router's web interface and log in using default credentials.
Provides a guided setup process for configuring the DSL Router, including ATM PVC configuration.
Details the steps for configuring the router using the PPPoA connection type.
Outlines the procedure for setting up the router using the PPPoE connection type.
Explains how to configure the router using the MAC Encapsulation Routing (MER) connection type.
Guides users through configuring the router with the IP over ATM (IPoA) connection type.
Details the steps for configuring the router using the Bridging connection type.
Guides on configuring Wide Area Network (WAN) interfaces and ATM PVC settings.
To Next Page
