TP-Link TD-8811 User Manual

TD-8811 ADSL2+ Modem Router User Guide
34
Chapter 4. Web-based Configuration
4.1 Device Info
The Device Info page provides the current information about the ADSL2+ Modem Router. All
information is read-only.
Figure 4-1
The information about the Summary, WAN, Statistics, Route, ARP, and DHCP are all
displayed. Click each of them, and you can get the detailed information.
4.2 Quick Setup
Please refer to 3.3 Quick Setup.
4.3 Advanced Setup
Choose “Advanced Setup”, and you can see the submenus as shown in Figure 4-2.

TP-Link TD-8811 Specifications

General

Connectivity LEDs	Yes
Dimensions (WxDxH)	165 x 108 x 28 mm
Connectivity technology	Wired
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
Networking standards	IEEE 802.1d
Ethernet LAN data rates	10, 100 Mbit/s
Routing protocols	IP
Supported network protocols	PPPoE, RFC 2364
DSL specification	ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.992.3, ITU-T G.992.5
Ethernet LAN (RJ-45) ports	1
Firewall security	Network address translation (NAT) firewall, Stateful packet inspection (SPI) firewall
Security algorithms	802.1x RADIUS
Filtering description	Domain
Product color	Black, White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	4.1 W

Weight and Dimensions

Weight	300 g