EasyManuals Logo

TP-Link TD-8811 User Manual

TP-Link TD-8811
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
TD-8811 ADSL2+ Modem Router User Guide
71
Appendix A: FAQ
1. What related parameters are required to acquire ISP when you want to access the
internet by ADSL Router?
1) Dial user: Connection protocol, User name, Password, Value of VPI/VCI,
Encapsulation mode of AAL5 and so on.
2) Static IP user: Connection protocol, WAN IP Address, Subnet Mask, Gateway, Value
of VPI/VCI, Encapsulation mode of AAL5 and so on.
2. About Connection protocol, VCI/VPI, Encapsulation mode of AAL5
1) This product supports the PPP protocol over ATM (PPPoA)PPP over Ethernet
(PPPoE)MAC Encapsulation Routing (MER)IP over ATM (IPoA) and Bridging. You
may be used with any one of the five protocols above. Because the ISP in different
areas supports different protocol, you must choose the protocol which is supported by
your ISP.
2) The VPI is the English abbreviation of the Virtual Path Identifier, the VCI is the English
abbreviation of the Virtual Channel Identifier, the value of VCI/VPI must be compatible
with the value that provided by ISP.
3) Encapsulation mode of AAL5 include: LLC/SNAP and VC_MAX(often using
LLC/SNAP).
3. Why the LAN’s and the NIC’s LED both bright, but the configuration interface is
inaccessible?
1) Use the order of ping 192.168.1.1 to check the Accuracy of connection.
2) Check the Accuracy of working NIC.
3) Whatever the setup of the IP address on your computer (if you close the DHCP
function, you can't obtain the IP address automatically, must specify the IP address of
your computer manually).
4) Run the winipcfg order in the windows 95/98(run the ipconfig order in the windows
2000) to check whether setup the IP address, subnet mask, default gateway by DHCP.
5) Resume the ADSL Modem default configuration if necessary.
4. Have complete all configurations, but can’t dial through computer
1) Check the indicator of ADSL, it should be working in normally.
2) Check the accuracy of parameter of value of VPI/VCI, Encapsulation mode of AAL5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TD-8811 and is the answer not in the manual?

TP-Link TD-8811 Specifications

General IconGeneral
Connectivity LEDsYes
Dimensions (WxDxH)165 x 108 x 28 mm
Connectivity technologyWired
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
Networking standardsIEEE 802.1d
Ethernet LAN data rates10, 100 Mbit/s
Routing protocolsIP
Supported network protocolsPPPoE, RFC 2364
DSL specificationANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.992.3, ITU-T G.992.5
Ethernet LAN (RJ-45) ports1
Firewall securityNetwork address translation (NAT) firewall, Stateful packet inspection (SPI) firewall
Security algorithms802.1x RADIUS
Filtering descriptionDomain
Product colorBlack, White
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Power consumption (typical)4.1 W
Weight and Dimensions IconWeight and Dimensions
Weight300 g

Related product manuals