TD-8811 ADSL2+ Modem Router User Guide
3
- I.432 ATM physical layer compliant
- Supports RFC2364 (PPPoA)
- Supports RFC2516 (PPPoE)
- Supports RFC1483 (EoA) (Bridged *and Router)
- Supports RFC1577 (IPoA)
)
Note:
“*” needs the third-party software.
1.4 Transmit Data-rate
¾ Max download data-rate: 24Mbps
¾ Max upload data-rate: 3.5Mbps
¾ Max line length: 6Km
1.5 ATM Property
¾ AAL0, AAL5, OAM, RM, and raw cell types supported
¾ Direct hardware support for 4 Receive VCs, with additional RX VCs and TX VCs supported
in software
¾ Full 24-bit Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI)
1.6 System Support
¾ Support PVC
¾ Support NAT、DHCP and so on
¾ Support IEEE 802.3、IEEE 802.3u
¾ Support 10Base-T/100BASE-TX full-duplex or half duplex Ethernet
¾ Support Auto-MDIX
1.7 Working Environment
¾ Operating temperature: 0 ~40 ℃℃
¾ Storage temperature: -40 ~70 ℃℃
¾ Humidity: 10%~90% (non-condensing)
1.8 Conventions
The Router or TD-8811, or device mentioned in this User Guide stands for TD-8811 ADSL2+
To Next Page
Loading...
