TD-8811 ADSL2+ Modem Router User Guide
68
Chapter 5. Software Dial
If TD-8811 CPE is working in bridged (RFC 1483 Bridged) mode when connecting to the
Internet, you must install dial software on your PC. There are some software working on
WINDOWS in market, examples as EnterNet3000、RASPPPoE、WinPeET.
How do I set up the connection in the windows XP?
¾ The users of Windows XP can click the “StartÆAll ProgramsÆAccessoriesÆ
CommunicationsÆNew connection wizard”, and then click Next to enter the
configuration page.
¾ Select the “connect to the Internet”, and then click the Next button to enter the next page.
Select the “set up my connection manually”, and click Next to enter the next page.
¾ Select the “connect using a broadband connection that requires user name and
password”. Click Next to type the name of your ISP in the current page, and then click
Next.
¾ Enter an ISP account name and password, and click Next. If you have forgotten an
existing account name or password, please connect with your ISP.
¾ To create the connection and close this wizard, click Finish to add a shortcut to this
connection to your desktop.
¾ When you want to access the Internet by ADSL, double-click this shortcut of dial
connection on your desktop. Enter the account name and password, and click Connect to
connect the Internet.
How do I set up the connection in the Windows Vista?
¾ Users of Windows Vista can do as follows: Right-press NetworkÆChoose Properties,
then you can see Figure 5-1.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
