TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide
49
Figure 4-
36
ADSL Mode: Select the ADSL operation mode which your ADSL connection uses.
ADSL Type: Select the ADSL operation type which your ADSL connection uses.
Bitswap Enable: Check this box to enable Bitswap.
SRA Enable: Check this box to enable SRA.
4.5 Access Management
Choose “Access Management”, you can see the next submenus:
Figure 4-37
Click any of them, and you will be able to configure the corresponding function.
4.5.1 ACL
Choose “Access Management→ACL”, you can see the next screen (shown in Figure 4-38). You
can specify the client to access the ADSL Router once setting his IP as a Secure IP Address
through selected applications.
To Next Page
