TP-Link TD-W8151N Installation Manual

1
Power down all of your network devices, including your computer(s) and the
Modem Router. If you currently use a modem, disconnect it now - the Modem
Router will replace your current modem.
Connect your computer to the
LAN port on the Modem Route
r
with an Ethernet cable.
Connect the splitter to the wall
j
ack using a telephone line, then
use the other telephone line to
directly connect it to the LINE port
of the Modem Router and the
MODEM port of the splitter, also
have the PHONE port of the
splitter connected to a telephone.
Note
If no telephone is needed, please connect the LINE port of the Modem
Router to the wall jack using the telephone line directly.
Note
Please use only wired network connections to configure the Router.

TP-Link TD-W8151N Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Frequency range	2.400 - 2.4835 GHz
Dimensions (WxDxH)	165 x 108 x 28 mm
WLAN data transfer rates supported	150 Mbit/s
Quality of Service (QoS) support	No
Ethernet LAN (RJ-45) ports	1
Security algorithms	128-bit WEP, 64-bit WEP, TKIP, WPA-PSK, WPA2-PSK
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi standards	802.11b, 802.11g
Top Wi-Fi standard	802.11g
Certification	CE, FCC, RoHS

Weight and Dimensions

Weight	- g