TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
9
Figure 3-4
Step 4: After that, you will see Figure 3-5. Click Finish to complete the installation.
Figure 3-5
Note:
1) All of the above settings are under windows XP.
2) If you want to pull out the USB device you must disconnect the network of USB first.
3) In the Vista operating system, maybe the “Unknown Device” screen will pop up when you
insert the USB cable of the Router to a computer, please just unplug the USB cable and try
again.
3.3 Login
Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:
To Next Page
Loading...
