TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
56
4.6.4 SysRestart
Choose “Maintenance→SysRestart”, you can select to restart the device with current settings
or restore to factory default settings in the screen (shown in Figure 4-52).
Figure 4-52
4.6.5 Diagnostics
Choose “Maintenance→Diagnostics”, you can view the test results for the connectivity of the
physical layer and protocol layer for both LAN and WAN sides in the screen (shown in Figure 4-53).
Figure 4-53
4.7 Help
Choose “Help”, you can view the help information for configuration of any function.
To Next Page
Loading...
