7
Chapter 2
Set Up Internet Connection
3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above
to connect to the other band.
4. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn’t,
relocate the extender closer to the router to achieve better signal quality.
Router Devices
Halfway
Suitable location
Too far from router
No connection
Tip:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
5. Enjoy! Connect to the extended network and enjoy the internet.
Extended Network Names:
Router’s network name with
_EXT
at the end
Passwords:
Same as your router
Tips:
1. If you cannot find the network names with _EXT in your Wi-Fi network list, this means that the extender has
been connected to a OneMesh router and automatically copied its wireless settings. For more information,
refer to OneMesh with Seamless Roaming.
To Next Page
Loading...
