TP-Link RE190 - Remove Extender from Onemesh Network; Method 1: Via the TP-Link Tether App

17
Chapter 3 OneMesh with Seamless Roaming
Tip:
If your host router does not support OneMesh, you need to reselect a host network first. Go to Settings > Wireless >
Connect to Network and follow the instructions to complete the configuration.
3. Follow the web instructions to join the OneMesh network. After that, you can view all
the devices in OneMesh network in Basic > OneMesh on the web management page
of your host router.
3. 3. Remove Extender from OneMesh Network
If you want to remove the extender from the OneMesh network, follow the steps below:
3. 3. 1. Method 1: Via the TP-Link Tether App
1. Launch Tether and select the extender you want to remove from the OneMesh
network.
2. Go to Tools > OneMesh and disable OneMesh.