TP-Link RE505X - How to Set Up a OneMesh Network

16
Chapter 3
OneMeshTM with Seamless Roaming
3. 2. How to Set Up a OneMesh
TM
Network
Once the extender is connected to a TP-Link OneMesh
TM
router via any method, the
extender will automatically join the router’s OneMesh
TM
network and copy the router’s
wireless settings. You can manage all mesh devices in the OneMesh
TM
network all on
your router’s web page.
If you want to remove the extender from the OneMesh
TM
network, follow the steps
below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > OneMesh and toggle off Join OneMesh.