TP-Link RE505X User Manual

27
Chapter 5 Customize Your Network
4. Click Save.
5. 5. Set Access Control
Access Control allows you to permit or block specific devices from accessing the
internet for a specific period.
Tip:
If the extender is in your router’s OneMesh network, it will automatically copy access control settings from your router.
No access control settings is needed for the extender.
1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > Advanced Settings > Access Control.
3. Enable Access Control.
• To block specific device(s):
1. Select Blacklist and click Save.

TP-Link RE505X Specifications

Wireless Specifications

wireless standards	IEEE 802.11a/n/ac/ax 5 GHz, IEEE 802.11b/g/n 2.4 GHz
frequency	2.4 GHz and 5 GHz
signal rate	300 Mbps at 2.4 GHz, 1200 Mbps at 5 GHz

Power

transmit power 2.4G	<20dBm
transmit power 5G	<30dBm
power consumption	10W

Dimensions and Physical Features

dimensions	2.9×1.8×4.9 in. (74.0×46×124.8 mm)
antenna	2 External Antennas
port	1 Gigabit Ethernet Port