1. Mark Position
Place the mounting template where you want the camera. For wall mounting, drill two holes through
two circles.
2. Mount Base
Affix the camera base using the screws. For wall mounting, insert two anchors into the holes and use
the screws to affix the camera base over the anchors.
3. Secure Camera
Attach the camera on the base and rotate to secure the camera.
Main Camera Controls
After you successfully set up the camera, you will see your camera listed on the home page. You can
view and manage your camera from anywhere at any time with the Tapo app.
Home Page
This page lists all your cameras you’ve added and you can view them directly and manage them
easily. Tap the camera or go to Camera Preview > Manage to enter the Live View page.
To Next Page
Loading...
