TP-Link tapo TC82 KIT - Mount Solar Panel and Camera KIT; 2. Mount Bracket; 3. Install the Solar Panel

13
Mount Solar Panel and Camera KIT
The Tapo Solar Panel charges your Smart Wire-Free Indoor/Outdoor Security Camera continuously.
For the setup video, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras
1. Drill Holes
Stick the mounting template to a solid and
level wall surface. Drill three screw holes
according to the template.
Φ=6 mm (15/64 in.)
2. Mount Bracket
Insert three wall anchors into the holes and
use the mounting screws to affix the solar
panel bracket over the anchors. Then, insert
two screw caps into the upper screw holes.
(√)
(×)
3. Install the Solar Panel
Slide the solar panel onto the mounting
bracket until it clicks into place.
Wall Anchors ×3 + Self-tapping Screws ×3 Screw Caps ×2