TP-Link tapo TC82 KIT - Mount Your Camera Only; 1. Drill Holes; 2. Install the Bracket; 3. Install the Camera

15
Mount Your Camera Only
To mount the camera individually, you can detach the camera bracket from the solar panel bracket and mount it to anywhere you want.
For the setup video, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras.
1. Drill Holes
Stick the mounting template to the desired
mounting place. Drill 3 holes according to the
template.
Φ=6 mm (15/64 in.)
2. Install the Bracket
Insert three anchors into the holes and use the
screws to ax the bracket over the anchors.
3. Install the Camera
Install the camera on the mounting bracket,
and adjust the camera angle.