-23-
IP Address:
If Static IP is selected, configure the IP address of WAN port.
If Dynamic IP is selected, the IP address of WAN port
obtained is displayed.
Subnet Mask:
If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN port
obtained is displayed.
Default Gateway:
If Static IP is selected, configure the default gateway. If
Dynamic IP is selected, the obtained default gateway is
displayed.
Primary DNS/Secondary DNS:
If Static IP is selected, configure the DNS. If Dynamic IP is
selected, the obtained DNS is displayed.
Upstream
Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream Bandwidth:
Specify the bandwidth for receiving packets on the port.
¾ L2TP Status
Status:
Displays the status of L2TP connection.
z “Disabled” indicates that the L2TP connection type is
not applied.
z “Connecting” indicates that the router is obtaining the IP
parameters from your ISP.
z “Connected” indicates that the router has successfully
obtained the IP parameters from your ISP.
z “Disconnected” indicates that the connection has been
manually terminated or the request of the router has no
response from your ISP. Please ensure that your
settings are correct and your network is connected well.
Consult your ISP if this problem remains.
IP Address:
Displays the IP address assigned by your ISP.
To Next Page
Loading...
