7
English
Determine Operation Mode
Mode
Switch
Operation
Mode
Scenario
3G/4G
3G/4G
Router
I want to share the 3G/4G network with my local devices.
WISP
WISP Client
Router
I want to have internet access from a Wireless Internet Service
Provider (WISP), and share internet with local devices.
AP
Access
Point
I want to access internet wirelessly, but only a wired network is
available.
Repeater/
Bridge
I want to extend my existing wireless network and connect a
wired-only device to the internet.
Connect the Hardware
1. Switch the operation mode to the determined one.
2. Connect the hardware according to the diagrams in the opening
chapter of this guide.
To Next Page
Loading...
