TP-Link TL-POE150S Installation Guide

Installation Guide
PoE InjectorPower Socket Ethernet Device
(switch, router, etc.)
PoE Injector
LAN IN
PWR
DC 48V
PoE Injector Only
The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE
AP and PoE IP Phone through an Ethernet cable.
IP Camera AP IP Phone
Powered Device (PD)
Note:
Set the required voltage
of the non-PoE device
before cable connection.
12V 9V 5V
PoE Splitter
LAN OUT
PWR
DC OUT
PoE Splitter
Non-PoE Device
(suggested power:<12 W)
PoE/PoE+ Switch
PoE Splitter Only
The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE
device.
PoE Injector PoE SplitterPower Socket
Ethernet Device
(switch, router, etc.)
Note:
Set the required voltage
of the non-PoE device
before cable connection.
12V 9V 5V
PoE Injector
LAN IN
PWR
DC 48V
LAN OUT
PWR
DC OUT
PoE Splitter
Non-PoE Device
(suggested power:<12 W)
PoE Injector & Splitter
The PoE injector and PoE splitter can be used as a kit to supply power and transmit data to a Non-PoE
device.
Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email techwriter@tp-link.com.cn.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
© 2020 TP-Link 7106508857 REV5.1.0
PoE Injector and PoE Splitter
For simplicity, we will take TL-POE150S and TL-POE10R for example throughout the Guide, other models may dier in appearance.

TP-Link TL-POE150S Specifications

General

Power over Ethernet (PoE) voltage	48 V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Certification	FCC, CE
Product color	Black
LED indicators	Yes
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Package depth	165 mm
Package width	198 mm
Package height	65 mm
Harmonized System (HS) code	85044090

Weight and Dimensions

Depth	54 mm
Width	80.8 mm
Height	24 mm