19
4.2 User
The Network Camera default account and password setting is “admin/admin”. Intelligent IP Installer
provides to assign a password if the Network Camera is intended to be accessed by others. Use this menu
to set the username and password of Administrator and up to 9 different users (User 1 to User 9), and the
authentication access right of each group.
¾ Username：Set a user name between 5 and 16 characters.
¾ Password：Set a password between 5 and 16 characters.
¾ Confirm：Re-type the password to confirm.
¾ Mode：Set a user to Admin, Operator or Viewer mode.
¾ Viewer authentication：Allows any viewer direct access to Live View.
To Next Page
Loading...
