20
4.3 Date/Time
¾ Current Setting：This displays the current date and time of the camera.
¾ PC clock：This displays the date and time of the monitoring PC clock.
¾ Adjust：Select one of four time adjusting modes.
¾ Keep current setting：Select this mode to keep the current date and time of the camera.
¾ Synchronize with PC：Select this mode to make the date and time of the camera the same as the
monitoring PC.
¾ Manual setting：Select this mode to manually adjust the date & time of the camera.
¾ Synchronize with NTP：Specify the NTP server name and the Refresh Interval to synchronize the date
and time of the camera with those of the time server, known as the NTP (Network Time Protocol)
server.
)
Note：
The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol (built on
To Next Page
Loading...
