21
top of TCP/IP) that assures accurate synchronization to the millisecond of computer clock times in a
network of computers.
¾ NTP server name：Type the host name or IP address of the NTP server, up to 64 characters.
¾ Time zone：Select the time zone and time difference from Greenwich Mean Time in the area where the
camera is installed from the pulldown box.
4.4 TCP/IP
¾ HTTP Port: Select port 80 in general situations. If you want to use a port number other than 80, select
the text box and enter a port number between 1024 and 65535.
)
Note：
When you have set the HTTP port number to a number other than 80 on the Network setting page or in the
Setup Program, access the camera by typing the IP address of the camera on the web browser as follows:
Example: when HTTP port number is set to 2000 Æ http://192.168.0.100:2000/
¾ MAC Address: Display the MAC address of the camera.
To Next Page
Loading...
