EasyManua.ls Logo

TP-Link TL-SC3130 - Page 24

TP-Link TL-SC3130
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
IP Address:
¾ Obtain IP automatically (DHCP): If a DHCP server is installed on the network, to select this while the
IP address is assigned by the DHCP server.
)
Note
When you set Obtain IP automatically (DHCP), make sure that the DHCP server is working on the network.
¾ Use the following IPSelect this when a fixed IP address is set.
z IP AddressEnter the IP address of the camera.
z Subnet maskEnter the subnet mask.
z Default GatewayEnter the default gateway.
DNS Setting
¾ Obtain DNS server automaticallyIf a DHCP server is installed on the network, to select this while the
DNS server is assigned by the DHCP server.
¾ Use the following DNS serverSelect this when you set the fixed address as the IP address of DNS
server.
z Primary DNSEnter the IP address of the primary DNS server.
z Secondary DNSEnter the IP address of the secondary DNS server, if necessary.

Other manuals for TP-Link TL-SC3130

Related product manuals