13
Method One: Push the button of the Range Extender and Wireless Adapter
Step 1: Keep the “WPS Status” as Enabled and click the Add Device button in Figure 4-2, then
the following screen will appear.
Figure 4-3 Add A New Device
Step 2: Choose “Press the button of the new device in two minutes” and click Connect.
Step 3: For the configuration of the wireless adapter, please choose “Push the button on my
access point or wireless router.” in the configuration utility of the WPS (as shown
below), and click Connect.
Figure 4-4 The WPS Configuration Screen of Wireless Adapter
To Next Page
Loading...
