11
Firmware Version - This field displays the current firmware version of the Range Extender.
Hardware Version - This field displays the current hardware version of the Range Extender.
Connection Status to Existing Network - This part shows you the current information of the
root wireless network which the device is connecting to.
Main Router/AP WiFi Network Name (SSID) - It shows the name of the wireless
network which your device is connecting to.
Signal - It shows the root wireless network's signal strength that the device has received.
Connection Status - It shows whether your device has been connected to a wireless
network currently. "Connected" means the range extender have connected to a wireless
network, while if it shows "disconnected", you can click "connect" to connect.
Network- The following is the information of Wired LAN. You can configure them in the
Network page.
Range Extender MAC Address - The physical address of the system, as seen from the
Network -> LAN page.
Range Extender IP Address - The IP address of the wired LAN.
Subnet Mask - The subnet mask associated with IP address.
Wireless - These are the current wireless settings or information of the device. You can
configure them in the Wireless -> Wireless Settings page.
Operation Mode - Indicates the mode which the device is working on. "Disable" means
the wireless radio has been turned off.You can configure it in the Wireless -> Wireless
Settings page.
Range Extender WiFi Network Name (SSID) - The Device's wireless network name
(also called SSID) which your PC or other device can be connected to.
Channel - The current wireless channel in use.
Mode - The current wireless mode which the AP works on.
Channel Width - The bandwidth of the wireless channel.
Wireless Rate - It shows the current wireless rate between the range extender and your
PC or other devices which are connected to the it.
Traffic Statistics - The system traffic statistics.
Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless.
Sent (Packets) - Traffic that counted in packets has been sent out from wireless.
Received (Bytes) - Traffic that counted in bytes has been received from wireless.
Received (Packets) - Traffic that counted in packets has been received from wireless.
System Up Time - The length of the time since the device was last powered on or reset.
Click the Refresh button to get the latest status and settings of the device.
To Next Page
Loading...
