Quick Installation Guide
©2018 TP-Link 7106508141 REV4.0.2
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.
Power On
1
Relocate and Enjoy
3
Enjoy the internet!
Connect and Extend
2
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender’s network.
2. Launch a web browser, and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password to log in.
Note: If the login window does not appear, refer to FAQ > Q1.
http://tplinkrepeater.net
Start
Conrm Password
Create Password
TP-Link_Extender
Note:
1. The Signal LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
3. Follow the instructions to complete the setup.
Method 3: Via the Tether App
1. Download the Tether app.
3. Launch the Tether app, and select your extender.
Create a password to log in.
Scan for Tether Tether
or
2. Connect your smartphone to the extender’s
network.
TP-Link_Extender
Note:
1. The Signal LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
4. Follow the instructions to complete the setup.
Method 1: Via the WPS Button
1. Press the WPS button on your router.
The extended network shares the same network
name and password as your router.
Note: If the WPS method fails, or if you want to customize the
extended network name, use Method 2 or 3.
The WPS button might
look like one of these:
2. Within 2 minutes, press the WPS button on the
extender for 1 second.
The Signal LED should
change from blinking to
solid on, indicating
successful connection.
Blinking On
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your host network.
2. Wait until the Signal LED turns solid blue. If it doesn't, relocate the extender
closer to the router to achieve better signal quality.
On
Extended NetworkHost Network
Blue: Suitable location
Red: Too far away
Network Name:
Customized/Same as host network
Password:
Same as host network
To Next Page
Need help?
General
Weight and Dimensions
