Contents [ hide
1 Plug and Play
2 Attention
3 Unify Your Wi-Fi Networks via WPS
4 Create a Secure Powerline Network by
Pairing
5 Sync Wi-Fi Settings to More Extenders
6 Button Legend
7 OneMesh with Seamless Roaming
8 Personalize Your Network
9 File Downloads
10 References
11 Related Manuals
Plug and Play
1. Plug the adapter into a power outlet and connect it to the router’s LAN port via an Ethernet cable.
2. Plug the extender into a power outlet on the same electrical circuit. Wait until the extender’s Power line LED
turns on.
Note: If the LED is blanking or off, please refer to FAQ>Q2.
3. Enjoy!
Connect your devices to the internet using the default SSID (network name) and password on the label at the
top of the extender.
To Next Page
Loading...
